-Maintenance can be carried out without removing the bollard. No lifting equipment required. -Interchangeable protective sleeve so that the bollard is always just like new. -Performance certified according to PAS 68; IWA 14-1 and ASTM F2656 standards. Able to withstand impact with a truck driven at 50 km/h. P1 penetration rating, still operational after impact.
Automatic bollard FAAC JS 48 HA
Model | JS 48 HA | JS 48 HA INOX | JS 48 HA EFO | JS 48 HA EFO INOX |
|---|---|---|---|---|
Type of operator | Hydraulic | |||
Cylinder height from ground | 1,000 mm | |||
Cylinder diameter | 275 mm | |||
Cylinder treatment | Cataphoresis | |||
Protective sleeve type | mDure® | Aisi 316 stainless steel + mDure® | mDure® | Aisi 316 stainless steel + mDure® |
Reflective strip height | 55 mm | |||
Standard reflecting strip colour | White | |||
Head material type | Aluminum | |||
Head treatment type | Rilsan® anticorrosive resin | |||
Rising speed | 170 mm/s | |||
Quick rise device | No | Yes | ||
Rising speed with EFO | – | 500 mm/s | ||
Release device | Yes | |||
Descent speed | 250 mm/s | |||
Power supply voltage | 207-243V ~ 50/60 Hz | |||
Max. power | 3.500 W | |||
Type of use | Perimeter Security | |||
Break in resistance | 673.000 J | |||
Operating ambient temperature | -15°C ÷ +80°C | |||
Operating ambient temperature with heater | -40°C ÷ +80°C | |||
Hydraulic pump unit protection class | IP67 | |||
Load class (EN 124) | C250 | |||
Traffic bollard weight | 530 kg | 560 kg | ||
Pit weight | 200 kg | |||