-Performance certified according to PAS 68 and IWA 14-1 standards. Able to withstand impact with a 7500 kg truck driven at 48 km/h in a double unit configuration -Guaranteed for high frequency use -Simplified maintenance (possible with just one person) -Hydraulic control unit integrated in the bollard -“Gentle stop” function to ensure a gentle stop on the low limit switch -Anti-tamper head and protected by a security lock with encrypted key to prevent unauthorized lowering
Automatic bollard FAAC J275 HA 2K20
Model | J275 HA 2K20 | J275 HA 2K20 INOX |
|---|---|---|
Type of operator | Hydraulic Unit | |
Cylinder height from ground | 800 mm | |
Cylinder diameter | 275 mm | |
Cylinder treatment | Cataphoresis and polyester painting | Aisi 316 satin-finish stainless steel |
Reflective strip height | 55 mm | |
Standard reflecting strip colour | White | |
Rising time | ~8 s | |
Descent time | ~4,5 s | |
Emergency descent device | YES (OPTIONAL) | |
Emergency descent time | ~2 s | |
Rising obstacle detection device | YES (OPTIONAL) | |
Release device | yes | |
Slow lowering | yes | |
Power supply voltage | 220-240V – 50/60Hz | |
Max. power | 575 W (*) | |
Hydraulic pump unit protection class | IP67 | |
Type of use | Perimeter protection | |
Break in resistance | 673,000 J dual unit | |
Pit weight | 100 kg | |
Traffic bollard weight | 170 kg | |
Operating ambient temperature | -15°C / +55°C | |
Operating ambient temperature with heater | -25°C / +55°C | |
Load class (EN 124) | C250 (25t) | |