Automatic bollard TISO RB343-21
- load: 15 t
TiSO traffic automatic bollards are due in part to the wide range of project applications and the simplicity of installation. This particular TiSO product has been designed and
Learn more
FAAC J200 HA Automatic Hydraulic Bollard, 600mm Height, 200mm Diameter, IP67
Category: Automatic bollards
IP67
protection
Cost
179 653,36 ₴ Price without Discount: 189 108,80 ₴
Price does not include installation and delivery.
J200 HA is a FAAC hydraulic bollard for sites where controlling vehicle access matters, but a full barrier or gate isn't the right fit. The 6mm-thick steel cylinder undergoes cataphoresis treatment and RAL 7021 powder-coat finishing — a coating built to withstand years of outdoor use without losing its protective properties.
Model Description
Speed where it's actually needed.
The bollard rises in roughly 5 seconds and lowers in about 7 — fast enough for responsive access control, without abrupt movements that would shorten the mechanism's lifespan.
Safety even in unusual situations.
An optional obstacle-detection device stops the bollard if something is in its path while rising. In case of a power failure, an emergency lowering function (~7 seconds) and a hydraulic lock in the raised position — with a dedicated release key included — keep the bollard secure even without electricity, rather than leaving it useless.
Built for daily outdoor use.
An IP67 protection rating on the hydraulic unit guarantees reliable operation in rain and dusty conditions. The bollard works across a temperature range of -15°C to +55°C, and down to -25°C with the optional heater — suitable for most climate conditions across Ukraine.
Installation without unnecessary complexity.
The support structure is cemented directly into the excavation — no wells are required. A standard connecting cable up to 50m long simplifies wiring at sites where the control panel sits some distance away.
Manufactured by FAAC. 24-month warranty.
Technical Specifications
| Model | J200 HA H600 | J200 HA H600 Stainless steel |
|---|---|---|
| Type of operator | Hydraulic operator | |
| Cylinder height from ground | 600 mm | |
| Cylinder diameter | 200 mm | |
| Cylinder treatment | Cataphoresis and polyester powder paint, dark grey metallised RAL 7021 | Satin finish |
| Reflective strip height | 25 mm | |
| Standard reflecting strip colour | Orange | |
| Rising time | ~5 s (*) | |
| Descent time | ~7 s (*) | |
| Emergency descent device | YES (optional) | |
| Emergency descent time | ~7 s (*) | |
| Rising obstacle detection device | YES (optional) | |
| Release device | YES | |
| Power supply voltage | 220-240V ~ 50/60Hz | |
| Max. power | 230 W (*) | |
| Hydraulic pump unit protection class | IP67 | |
| Type of use | Use in residential areas | |
| Operating ambient temperature | -15°C / +55°C | |
| Operating ambient temperature with heater | -25°C / +55°C | |
| Load class (EN 124) | C250 (25t) | |
| Total weight | 90 Kg | |
The table can be scrolled horizontally
Video
Photo Gallery
Request a quote
Send a request — an engineer will select a configuration for your facility and send a proposal.
- A configuration matched to your throughput and operating mode
- A commercial proposal with prices for equipment and works
- Answers on installation and integration with your access control system
Phone: +38 097 910 29 29
Product: FAAC J200 HA Automatic Hydraulic Bollard, 600mm Height, 200mm Diameter, IP67
Similar models
-
-
Automatic bollard TISO ASTM, M30
- load: 15 t
TiSO M30 High security automatic bollards are designed to prevent unauthorized vehicles access to secure areas and to provide the highest level of antiterrorism protection. This
Learn more
-
Automatic bollard TISO ASTM, M50
- load: 15 t
TiSO M50 High security automatic bollards are designed to prevent unauthorised vehicles access to secure areas and to provide the highest level of antiterrorism protection.
Learn more
Need help selecting equipment?
Tell us about the facility: number of passages, operating mode, protection requirements.
We will reply within 24 hours